The SR1-MIL is intended for engaging short to medium range targets, is subtended in Milliradians (MIL), and is optimized for our 1-8 optical system. The reticle features a large, bright outside ring for use on close range targets. This ring falls from the field of view at higher magnification, and a milling tree appears for when precise hold overs are needed.

Sights That Use This Reticle

The SR2-MOA is hybrid BDC reticle intended for engaging short to medium range targets with popular cartridges and is subtended in Minutes-of-Angle (MOA). The ballistic tree is calibrated for common hold points from approximately 0-600+ yards and provides windage subtentions appropriate for these distances.

Sights That Use This Reticle

The SR3-MIL is intended for engaging short to medium range targets, is subtended in Milliradians (MIL), and is optimized for our 1-5 optical system. The reticle features a large, bright outside ring for use on close range targets. This ring falls from the field of view, at higher magnification, and a milling tree appears for when precise hold overs are needed.

Sights That Use This Reticle

The SR4-MOA is hybrid BDC reticle intended for engaging short to medium range targets. The BDC is calibrated for popular cartridges and is subtended in Minutes-of-Angle (MOA). Additionally, The SR4-MOA features a large outer ring for quick acquisition of close range targets. The ballistic tree is calibrated for common hold points from approximately 0-600+ yards and provides windage subtension appropriate for these distances.

Sights That Use This Reticle

The MR1-MOA is intended for engaging medium to long range targets and is subtended in Minutes-of-Angle (MOA). The reticle features a precise aiming dot .5 MOA in diameter. The dot is surrounded by a series of 1 MOA spaced, precise, hold points allowing for specific windage adjustments and during ever-changing conditions.

Sights That Use This Reticle

The MR1-MIL is intended for engaging medium to long range targets and is subtended in Milliradians (MIL). The reticle features a precise aiming dot 0.05 MIL in diameter. The dot is surrounded by a series of .2MIL spaced, precise, hold points allowing for specific windage adjustments during ever-changing conditions.

Sights That Use This Reticle

The LR1-MIL is intended for engaging medium to long range targets and is subtended in Milliradians (MIL). The reticle features a precise aiming dot 0.1 MIL in diameter. The dot is surrounded by a series of .2MIL spaced, precise, hold points allowing for specific windage adjustments during ever-changing conditions. Additionally, these windage holding marks are laid out into a tiered grid allowing for rapid holdovers at most any distance. The absence of horizontal lines results in a 50% reduction in field of view obstruction.

Sights That Use This Reticle

This hybrid BDC reticle intended for engaging short to medium range targets. The BDC is calibrated for popular cartridges and is subtended in Minutes-of-Angle (MOA). Additionally, it features a large outer ring for quick acquisition of close range targets. The ballistic tree is calibrated for common hold points from approximately 0-500+ yards.

Sights That Use This Reticle