The LG-496 Laserguard® is a compact laser sight for Springfield Armory's XD MOD.2 Series pistols. Attached firmly to the trigger guard, the laser's slim profile matches that of the pistol, and features Crimson Trace's trademark Instinctive Activation™. The laser sight is user-installed in minutes and is adjustable for windage and elevation.
⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
| Product Platform | Lasergrips® |
|---|---|
| Material | Polymer |
| Color | Black |
| Activation Location | Front Activation |
| Master On/Off Switch | Yes |
| Attachment | Grip Replacement |
| Battery Type | Two #2032 Batteries |
| Finish | Polymer Grip with Rubber Overmold Activation Pad |
| Installation | User Installed |
| Laser Battery Life | Over Four Hours |
| Activation Mode | Pressure Activated |
| Sighting | Factory Sighted at 50' |
| User Adjustable | Windage and Elevation |
| Warranty | Three Year Full Warranty |
| Wrench Size | 0.028 |
| Dot Size | Approx. 0.50" at 50' |
-
It works very well but needs a disable switch Review by Techsys
Rating First, make SURE you write down the internal serial number before you install this device.
The Laserguard comes as two separate pieces split down the middle lengthwise that cup the rail and trigger guard and is held together with 3 tiny black steel hex screws that go in from the left side toward the right side which apparently has tiny inset nuts. Construction appears to be a rugged plastic so it doesn't add a lot of noticeable weight so I like that.
I have removed and reinstalled it several times and believe the holes for the screws on the left side could be slightly larger to allow the screws to pass more easily. One difficulty for me, being right-handed, is trying to adjust the beam when the left-right adjustment is on the right side instead of the left.
It is really difficult to avoid hitting the beam switch (it's on the grip) so my one wish would be to have an additional disable switch on the device for range practice without a beam.
The device seems to retain a fair degree of accuracy between removal and reinstallation but I've only had it a few weeks. It's a little pricey but I can recommend this product. (Posted on 2/5/2020)
-
Works as described Review by Abouttime
Rating Bought this laser and quickly installed it on my XD Mod 2 3.3 9mm pistol. Went on with no difficulties and was already zeroed. Took it to the range and it worked great. This is my 3rd CT laser (for different guns) and all have worked as described. (Posted on 5/16/2019)
-
Did not fit as advertised Review by jwc
Rating Product did not fit my gun as advertised. I have an XDS Mod 2 9mm 33" single stack, the laser sight was less than a quarter of an inch too long, which is surprising since CS website says this will fit a 3" barrel. Otherwise, it seemed to work well, nice, bright laser; it just wouldn't fit my gun. (Posted on 3/24/2019)
