" />

LG-469H Laserguard® with Pocket Holster for Springfield Armory XD-S

SKU# 01-3870

Availability: In stock (14)

Regular Price: $239.00

Special Price: $139.99




Availability: In stock (14)

Laser Sight and Pocket Holster Bundle for Springfield Armory XD-S 3.3 and 4.0 Pistols


  • There are no files

Quick Overview

Laser Sight and Pocket Holster Bundle for Springfield Armory XD-S 3.3 and 4.0 Pistols

4.25  |  4 reviews

The LG-469 Laserguard® is a compact laser sight for Springfield Armory's XD-S pistol. Attached firmly to the trigger guard, the laser's slim profile matches that of the pistol, and features Crimson Trace's trademark Instinctive Activation™. The laser sight is user-installed in minutes and is adjustable for windage and elevation.

This product is bundled and includes a Tuff Products holster.

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Product Platform Laserguard®
Material Polymer
Color Black
Activation Location Front Activation
Attachment Trigger Guard
Battery Type One 1/3N Lithium or Two 357 Silver Oxide Batteries
Finish Polymer Housing with Rubber Overmold Activation Pad
Installation User Installed
Laser Battery Life Over Four Hours
Activation Mode Pressure Activated
Sighting Factory Sighted at 50'
User Adjustable Windage and Elevation
Warranty Three Year Full Warranty
Dot Size Approx. 0.50" at 50'
  1. Great Product Review by Jason

    The laser came on the gun when I bought it. This was one of the reasons I bought this because I knew what quality product I was getting with my new pistol. Have a laser on my Sig P238 also. Just can't say enough about the laserguard. (Posted on 11/30/2015)

  2. Not a stable device Review by Texas Bound

    I purchased this crimson trace model LG- 469 laser about a year ago (which at that time came with a hidden hybrid IWB holder) for my Springfield Armory XDS .45 with high expectations since most crimson trace laser products are of very good quality.

    The clarity of the laser light itself and the free batteries for life are hard to beat. Little or no effort is required to activate the device and it is completely intuitive. However, the 2 screws which hold the unit in place at the front of the trigger guard do not effectively hold the unit securely. When the unit is as tight as you can get it, it can move ever so slightly to the left or right, throwing the zero off by a large amount.

    It mounts in a single slot which runs perpendicular to the slide at the tip of the frame and is not a tight fit when properly installed. A laser necessarily has to be tightly secured at all points to retain zero and the LG-469 for this particular gun does not.

    I used the laser for a few months and had to constantly adjust my zero because it was all over the place. It was not user error because each time I put the gun in a stationary holder at the exact same place every time to check, it was off of the iron sight zero to the right or to the left (up and down held fine).

    After tiring of continually adjusting the zero, I took it off and stopped using it, relying instead on the iron sights.

    I would not recommend the LG-469 for a Springfield Armory XDS. (Posted on 12/5/2014)

  3. Excellent product Review by Steve

    This has been on my gun for nearly a year. I carry my XDS all day, every day in a CrossBreed Minituck. I also train with this weapon monthly, shooting 100+ rounds each time. The LaserGuard performs flawlessly and the sighting has remained exact the entire time. There are no issues from the LaserGuard when reholstering, even with support hand only drills. I haven't had to change the battery yet, but the installation and sighting-in was quick and easy, so I'm not concerned about it. I often cover the laser with electrical tape when I train (to hone my sight alignment skills and to not let the laser become a crutch), but when I practice with the laser, I notice that my target acquisition is even faster and more accurate. My LaserGuard has definitely become a must-have item on my XDS! (Posted on 10/6/2014)

  4. Excellent Product!! Review by Harold

    I bought one, installed it my self, and zer0ed it in with no issues! Made in the USA !!!! (Posted on 12/14/2013)

Write Your Own Review:

You're reviewing: LG-469H Laserguard® with Pocket Holster for Springfield Armory XD-S

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Includes Tuff Products Pocket Holster
Laser sight for Springfield Armory XD-S 3.3 and 4.0
We use cookies to improve your browsing experience. By continuing to browse our website you agree to our use of cookies. To learn more about how we use cookies, please review our privacy policy here.