LG-478 Lasergrips® for Kimber Micro .380

SKU# 01-3240

Availability: In stock

Price:   $339.00



Availability: In stock

Laser sight for Kimber Micro .380

Quick Overview

Laser sight for Kimber Micro .380
5  |  3 reviews
Crimson Trace LG-478 lasergrips for Kimber Micro .380Crimson Trace LG-478 lasergrips for Kimber Micro .380
Move your mouse over image or click to enlarge
Crimson Trace LG-478 lasergrips for Kimber Micro .380 red laser sight for Kimber Micro .380

LG-478 Lasergrips® are the ultimate laser sight for one of the finest concealed carry handguns available - the Kimber Micro .380.  Among our slimmest Lasergrips® ever, the LG-478 features a rubber overmold front activation pad fused with durable polymer grips. User-installed in minutes, Lasergrips enhance the defensive capabilities of the compact Micro line of pistols. This model is specifically designed for Micro .380 ACP models. Please see model LG-409 for Micro 9mm models.

Product Type Lasergrips®
Material Polymer
Attachment Grip Replacement
Activation Location Front Activation
Sighting Factory Sighted at 50'
Master On/Off Switch Yes
Free Batteries For Life Yes
Battery Type Two #2032 Batteries
Laser Battery Life Over Four Hours
Laser Output 5mW Red Laser
Activation Mode Pressure Activated
Laser Visibility Approx .5 Inch Diameter at 50 Feet
Wrench Size 0.028
User Adjustable Windage and Elevation
Finish Polymer Grip with Rubber Overmold Activation Pad
Installation User Installed
Warranty Three Year Full Warranty
Color Black
Dot Size Approx. 0.50" at 50'
  1. LOVE THEM Review by ROBERT


  2. Great grips within their design limits and the weapon they will be on. Review by Patrick H.

    To the grips. On the design limits, these are small grips for a small pistol. Main thing there, besides big hands, is with your trigger finger out of the guard it is easy to move it up enough to block the laser, minor issue, was easy to adjust to for me with average size hands for a man. Other wise grips felt good and no real loss of space compared to original grips. It is a red laser so easier to see in lower light conditions. My main reason was for home defense and back up weapon, using with thought to being night / low light. Due to weapon's design, no rail mount, this is about the only option for laser mount,(short of duct tape), and at this time only available in red light. Since it is mainly for close in defense it should not be a big issue but did want to mention. Activation button,(under middle finger), is easy to press with normal grip. If I don't focus on it I don't even notice the action of the button. I also like that it has a master on/off switch in a recessed position on the lower part of the left side grip. That way you can easily turn it off if you don't want it on for some reason without having to open the grips and also no worry of hitting it by accident.
    Installation is pretty straight forward. You will need a 3/32 Allen wrench for the grips screws. Same screws are used in new grip which is a one piece unit. I do want to point out one thing, as it is not mentioned in the instructions, and before you have a minor "wtf" moment as I did. Before you put on the new grip you may have to move the upper screw post on the right side. Not a issue, you will need a small crescent wrench or wrench around 1/4" or so. I had a crescent and didn't think to measure it before I put it together. It is a small post with the typical two flat sides to grip at. It is firmly tightened but will unthread without problem, does not appear to be any lock-tight material on it and has a short thread reach. It will need to be moved into the pre-threaded hole right below that one. Snug it good but not to hard, don't want to strip it, as I said short threads. And make sure what ever tool you use has a firm bite on the two flat side, may be easy to round off some. After that the grips will fit just right. Of course don't forget to put the batteries in the grips first. Speaking of which,in the box you will find the grips, usual additional papers, instruction guides, 2 cleaning swabs for the lens, adjusting tool for laser alignment and a couple of small warning decals you are supposed to put on your pistol which I am sure add to it's fine lines-lol. All in all only takes a few minutes if you haven't done one before, no where as long as I "word" it. I think I may need to adjust mine, seems just a bit to the right and up but that should not be a problem. And of course do all of this with the weapon un-loaded and cleared and watch the trigger finger if you are just trying the laser out. Remember - stupid kills. This was the first grip style laser I have installed/used and wrote this from that view point, so, please excuse me if I got a bit lengthy. Hope this is helpful. (Posted on 12/7/2016)


    4 HAND GUNS WITH CT GRIPS ALL ARRE GREAT!!!!!!! (Posted on 9/13/2016)

Write Your Own Review:

You're reviewing: LG-478 Lasergrips® for Kimber Micro .380

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Fits Kimber Micro .380