" />

LG-480 Lasergrips® for Walther PP and PPK/S [DISCONTINUED]

SKU# 01-1970




DISCONTINUED - Laser Sight for Walther PP and PPK/S Pistols

Quick Overview

DISCONTINUED - Laser Sight for Walther PP and PPK/S Pistols
3.9375  |  16 reviews
LG-480 Lasergrips® for Walther PP and PPK/S [DISCONTINUED]LG-480 Lasergrips® for Walther PP and PPK/S [DISCONTINUED]
Move your mouse over image or click to enlarge
LG-480 Lasergrips® for Walther PP and PPK/S [DISCONTINUED] LG-480 Lasergrips® for Walther PP and PPK/S [DISCONTINUED]

The famous Walther PPK/S design dates back over 50 years and variants have been produced by many different manufacturers. As a result, many subtle differences in models have made their way to market. Thanks to a true-fitting cam system, Crimson Trace® is proud to offer laser sights for your Walther that won’t budge under heavy use. Featuring hard polymer sides with an aggressive checkering pattern for an easy grip, your Walther will draw without snagging and provide the tactical advantage that only Crimson Trace Lasergrips® can offer.

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Product Platform Lasergrips®
Material Polymer
Attachment Grip Replacement
Activation Location Front Activation
Sighting Factory Sighted at 50'
Master On/Off Switch Yes
Battery Type Two #2032 Batteries
Laser Battery Life Over Four Hours
Laser Output 5mW Red Laser
Activation Mode Pressure Activated
Laser Visibility Approx .5 Inch Diameter at 50 Feet
Wrench Size 0.05
User Adjustable Windage and Elevation
Finish Polymer Grip with Rubber Overmold Activation Pad
Installation User Installed
Warranty Three Year Full Warranty
Color Black
Dot Size Approx. 0.50" at 50'
  1. Unusable Lasergrip ... failed switch Review by John-Henry

    Bought the Laser Grips for the purpose of Concealed Carry. Laser grips worked for about one year. Bought in 2011 and today they are completely useless. Tried many new batteries to ensure it was not the batteries, but it ended up being the switch on the bottom and the button you push to get the laser light on. Very disappointed with the purchase (Posted on 8/19/2016)

  2. Large hands can block laser. Review by Charlie

    Works great, however I have a big hand and sometime this block the laser. Can the laser be place on the left side of my PPK, instead of the right? (Posted on 9/23/2015)

  3. Great Product Review by John

    I use it on of my walther ppk/s pistols one in 32acp one in 380acp. I swap the grips back and fourth depending on caliber and carry mode. looking to get another one so I don't have to swap back and fourth between pistols. (Posted on 8/6/2015)

  4. Bring'em back Review by Shooter

    I've had these grips for over 6 years now and I love them. I've never had any issues. I've recommended them to several friends, but for some reason Crimson Trace no longer produces them. Bring'em back? (Posted on 12/2/2014)

  5. Does NOT fit PPK/S Review by Brenda

    Sorry to be a downer, this looks like a great product, but I just bought a new Walther PPK/S....bought this laser for it. Removed the factory grip and under it was a convex pad of stainless steel. For this grip to work that area needs to be either concave or flat.
    This grip laser does NOT fit on the new PPK/S despite what the box says.

    (Posted on 8/28/2013)

  6. Grips cover about 1/2 of the grips on the left of the slide. Review by Dead Dog

    I am a 62 year old fart and my hands are not real strong anymore. I really like the LG-480 grip/laser sight for my Walther. The only thing I don't like is it is harder to chamber a round with part of the groves covered. To try and overcome this I started to squeeze a rubber ball a hundred times a day. The laser guard type would be better (Posted on 2/21/2013)

  7. srew for grip Review by TC

    The original screw that comes with the Walter made by S & W is a fraction too long for the laser grip after about 100 rounds you can see that the screw will protrude out of the right side of grip. Ive contacted S& W and they suggest to file it down . You have to be careful and not damage the treads . Crimson trace should correct this by including a screw the correct size I have asked them but they dont seem responsive I have filed it down but there still is a small indent where the original screw started to wear through. Otherwise a great product (Posted on 1/29/2013)

  8. This the best sight for low or dark Review by Terry

    I bought one for my ppk/s because I have one on my smith wesson 357 that I liked so much great product if I get another hand gun it will have a crison trace on it . (Posted on 12/15/2012)

  9. Still works perfect after 5 years of tropical carry Review by KodiakJack

    The lasergrips for my S&W version stainless steel PPK/s fit perfectly and were easy to install. Not only that but once the screws were tightened my gun shot (almost exactly) where the laser pointed right out of the box. After a couple tweaks to the sighting screws with the provided Allen-wrench it has shot consistently where the laser points year after year. Frankly I was worried about having a battery powered sighting system here in the tropics but the CrimsonTrace has proven to have worked flawlessly after 5 years of almost daily tropical carry.

    PS When I say tropical carry, I mean hot and humid, conditions that you might think would take their toll on a laser sight….not so with the Crimson Trace LG-480.
    (Posted on 12/15/2012)

  10. Product failed quickly Review by DN

    Purchased grips and installed easily. Issue is the button began to fail. The laser would not always turn on despite new batteries. Eventually the mechanism failed. Now it just sits in the box, $340 wasted. (Posted on 9/29/2012)

  11. Perfect Fit! Review by Timothy

    I just recieved my Crimson Trace Lasergrip for my Walther PPK/s in today's mail. Even though I will not be able to go to the range till the end of the week, I couldn't wait to install it.

    I was a little skeptical of the cam system that is used to adjust the grip panel to fit with all of the multiple manufacturers of this firearm over the last 40 years.

    I shouldn't have been concerned. I bought my PPK/s new as a college graduation present to me, from me, in 1976. It was made in East Germany and the grips almost snapped in. They were a perfect fit without making any adjustments. Can't ask for better than that.

    The laser does obscure about half of the grip grooves on the rear of the slide on the right side. Minor problem and I will just have to adjust how I manipulate the slide. A slightly more concerning problem is how the safety lever rubs the grip on the left side. This does make you have to be more aware when you engage the safety.

    Next stop, the range. I will update after I have a chance to do some shooting with this laser.


    Tim (Posted on 9/24/2012)

  12. If James Bond had a laser... Review by Thomas

    This is a trusty sight for the PPK. I bought mine with the laser grip pre-installed. It fit perfectly in my hand, and the laser was accurate after some minor adjustments. Great product! (Posted on 6/22/2012)

  13. Nice Add-on Accessory for a Classic Pistol Review by BigG

    Got my laser as a christmas gift - sweet!. Takes a little bit of time and some trial and error to get the grips adjusted to fit the grip frame properly but nothing that would be too challenging for the average gun owner. Getting it zeroed in for a specific range (like 10 meters) also takes a little bit of trial and error from a bench rest. The windage and elevation adjustments for the laser are good but they are not "click adjustable" like a traditional rifle scope so there is a bit of "adjust and fire for effect" type of guesswork involved with getting it zeroed in for the desired range in addition to the box of ammo that you will go through doing this. I had one small problem with the underside of the safety lever rubbing slightly on the top of the left side of the grip becasue the tolerance was so tight between them. This led to some chambering issues with the safety on becasue the safety level was getting caught on the top of the grip when I cycled the slide. After making some additional adjustments to the grip fit as well as just "breaking in" the new grip to the frame, the action was no longer being restricted by the new grip with the safety on. Other than the minor issues noted above, the sight works great and it adds a lot of value and effectiveness to a personal carry and home defense pistol that I have had for many years. (Posted on 1/20/2012)

  14. Fast target acquisition Review by Bud

    I keep it by my bed in the nightstand, the laser sight is clearly visable in the dark and would most likely scare the pants off a burgler once they saw the red laser light. (Posted on 12/18/2011)

  15. Offers Quick Target Acquisition on a Classic Pistol Review by David

    I bought my PPK/S with the LG-480 grips already installed on it. These LaserGrips allow me to quickly obtain target acquisition without the need to raise the sites up to eye level, which is critical in a self defense situation where seconds can make a difference. I carry this Walther in the warmer months and love the fact that the Crimson Trace grips do not make it any bulkier than the standard factory grips, nor do they detract from the classic looks of this iconic piece. (Posted on 12/12/2011)

  16. Walther PPK/S and LaserGrips make the perfect self defense combo! Review by IBEWSportsman

    I bought my Walther PPK/S with the Crimson Trace LG-480 LaserGrips already installed. The quality and color of the grips not only compliment this classic pistol, but they increase my confidence through the knowledge that I can get on the target quickly and precisely, saving precious seconds it takes to bring the gun up to eye level in a life threatening situation. You just squeeze the grips and put the red dot where you want it. (Posted on 12/11/2011)

Write Your Own Review:

You're reviewing: LG-480 Lasergrips® for Walther PP and PPK/S [DISCONTINUED]

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Fits Walther PP and PPK/S. Does not fit PPK or PPK/S .22LR
We use cookies to improve your browsing experience. By continuing to browse our website you agree to our use of cookies. To learn more about how we use cookies, please review our privacy policy here.