" />

LG-448 Laserguard® for Springfield Armory XD and XD(m)

SKU# 01-6090

Availability: In stock

Price:   $239.99



Availability: In stock

Laser Sight for Springfield Armory XD and XD(m) Pistols

Quick Overview

Laser Sight for Springfield Armory XD and XD(m) Pistols
4.3333333333333  |  15 reviews
Crimson Trace LG-448 laserguard  for Springfield Armory XD & XDMCrimson Trace LG-448 laserguard for Springfield Armory XD & XDM
Move your mouse over image or click to enlarge
Crimson Trace LG-448 laserguard  for Springfield Armory XD & XDM red  laser sight for springfield armory XD & XDM

Springfield Armory's XD(m) and XD pistols are acclaimed for their superior balance, reliability and ergonomics. Crimson Trace is pleased to release laser sights for XD(m) and XD pistols. The LG-448 Laserguard® is designed to fit both lines in all sizes and calibers. Featuring Instinctive Activation™, the laser sight immediately springs to life when held in a normal firing grip. Attaching firmly to the trigger guard and balanced against the accessory rail notch, the LG-448 can be zeroed by the user to their individual firearm (both windage and elevation) and has been rigorously tested to hold zero under the most demanding field conditions.

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Product Platform Lasergrips®
Material Polymer
Color Black
Activation Location Front Activation
Master On/Off Switch Yes
Attachment Grip Replacement
Battery Type Two #2032 Batteries
Finish Polymer Grip with Rubber Overmold Activation Pad
Installation User Installed
Laser Battery Life Over Four Hours
Activation Mode Pressure Activated
Sighting Factory Sighted at 50'
User Adjustable Windage and Elevation
Warranty Three Year Full Warranty
Wrench Size 0.028
Dot Size Approx. 0.50" at 50'
  1. Laser Moves Back and Forth from Holster Review by Jordon

    Because this laser does not utilize the rail, it will shift side to side when I take it in and out of my holster. This makes the laser useless. It is a shame that I have to go through the hassle of reselling it, now. (Posted on 12/15/2015)

  2. XD Mod 2 Subcompact 9mm Review by Bob

    Quick install and a perfect fit. Front end flush with slide and barrel. Clamps around trigger guard and uses one notch of the rail but does not actually clamp to the rail. Very secure. (Posted on 8/28/2015)

  3. excellent Review by hot potato

    Bought my Springfield XD .40 from a local retailer. Gun came already equipped with the crimson trace red laser. They made the laser fit perfect with the guns ergonomics. Feels like it is a factory piece. After easily adjusting the laser to my liking it is dead on and have even been able to hit a 4" circle target from 30' holding the gun sideways and, you know, "throwing the bullets" like a real OG. I bought the gun for home protection and for target shooting. Laser does its job and I couldn't be happier with the Springfield/Crimson Trace combo. (Posted on 3/28/2015)

  4. moves side to side a little... Review by kev

    Love it except that it will move side to side a little bit. I can't push it one way or the other a little with my finger and the dot will move out of alignment with the Iron sights. Also does it from being in the holster on my side. The screws are plenty tight. Its on an xd .40 sub compact. (Posted on 11/27/2014)

  5. excellent Review by bddfc

    top of the line (Posted on 1/10/2014)

  6. love these lasers Review by ex-capt444

    I have XDM 9mm and read all about Crimson Trace. Purchased the
    Laserguard 446 and have loved it since day one. I don't ever have to
    remember to turn it on, because just a normal grip on my gun will turn
    it on. It is one less thing I need to remember if I need to use in a high
    pressure situation. I bought a second pistol almost a year later and
    did not think twice about buying a Crimson Trace Laser for that one
    too. Once they were zeroed in, they stayed on target and had great
    battery life. I had a operational problem on one of the Lasers, but
    Customer service replaced the unit without delay. I was up and running
    again in almost no time. I would highly recommend this laser to all. (Posted on 9/24/2013)

  7. Bad Service, Product does not work Review by Chris

    I bought a LG-448 for my XD, I installed it and It did not work. I tried differnt batteries and still it did not work. I have tried to contact Crimson trace over e-mails and the website, and still have not heard back from them. (Posted on 3/2/2013)

  8. Great Fit Review by John

    Product was very easy to install. It fits the 9mm 5.25" Competitor Series gun great. Looks and operates as expected, thankfully. (Posted on 3/1/2013)

  9. Can't rave enough about these sights Review by Michiel

    After buying a set of grips for my Colt Defender and falling in love, I went out to buy a set for my wife's XD subcompact. After looking at those grips, I went with the laserguard, instead. I'll admit, I'm a cheap bastard, so saving money was great, as well. I was worried that there might be a difference between using grips and the laserguard, but they use the same theory of the button switch in front of the grip. Works great. With a barrel as short as the sub has, I was worried that it might be best used for a close contact situation. But with the help of the laser, I was getting impressive groups at 25 yards in the pumpkins I was persecuting. How impressive? I drew a set of eyes on the gourd with magic marker (I figure it was like having two small targets to shoot at). I was able to keep all rounds inside the eyes, right out of the box. This laser thing is great! If you're like me, and held off buying lasers in fear of becoming lazy, don't. These lasers-both for the Colt and the XD are the best mods I can do to the pistols, in my opinion. I'll add a set to each gun I use for defense from now on... (Posted on 11/22/2012)

  10. Excellent Review by Ray

    After getting a Crimson Trace LaserGuard for my LCP I just had to have one for my XD-9 SubCompact. I was concerned about the fit because of the short barrel so I called crimson trace and was assured it would fit. It fit perfectly and just as easily as the CT laser on my LCP. Wow! I could not be happier. My friend watched me shoot out the center of my target and said " you could probably write your name with bullet holes". So I took out the ring numbers on the target. He had me buy a CT laser for his KelTec and now he's very happy too. (Posted on 4/3/2012)

  11. Great Product Review by Trigger

    I recieved this laser sight as a gift from my uncle when I purchased my xd subcompact .40. Upon taking it out of the box i was excited. The laser looks great and feels great! It snapped right on to my xd and 3 small screws and 10 min later it was snug tight!! It works really well.

    The only thing I do not like about using the laser, has nothing to do with Crimson Trace, but that there are only a few holsters that will hold the xd with this laser installed. I love my blackhawk concealed carry holster and hate to give it up to use my laser. I wish blackhawk would make an accomodating holster. (Posted on 1/18/2012)

  12. Excellent! Review by PaulW

    Had tried a competitive product that mounts on the rear sights, and took it off (want to buy it from me cheap? lol). Purchased this and could not have been more pleased. Installed very easy (surprizingly actually). So far, factory aim set at 50' worked as advertised. Had to get a new holster, of course, but got that as well and am extremely happy. Managed to talk my wife into one for my Sig P238 for Christmas! (Posted on 12/18/2011)

  13. Won't Leave Home Without It Review by bobbert

    Easy installation, Great feel, increased my accuracy. I've even plucked a couple of varmits (Oppossum and Raccoon) from under my bird feeder with it. Loved my XD(M) before - with the LG-448 - Love it even more. (Posted on 12/11/2011)

  14. Just the BEST!! Review by cia1984

    Where to start? Design: just brilliant! The placement under the trigger guard enables truly instinctive control of the light. Slight natural grip pressure using the middle finger, paints the target only when needed to make a shot. The original gun thickness is preserved.

    Installation: 10 minutes from a sealed box to checking sight alignment!

    Reliability: Mine spent a day in my dogs water bowl in the car! (Don't ask!). A quick wipe, dry with heater vents in the car, and it worked like new! I've fired about 300 rounds with this sight, and no adjustments have been necessary. I carry concealed daily, and the sight is always mounted on the gun (XD(m) 3.8 compact 40).

    I did have to get a new holster that could accommodate the new shape caused by the laser. Dragon made one that works perfectly. It is both an IWB/OWB tuckable rig. I also got a vehicle holster.

    My Crimson Trace goes everywhere!

    (Posted on 12/4/2011)

  15. Love it! Review by creepyguy

    Installed in minutes on my XD40SC. Actually like it better than the Lasergrips model because I can keep my grip thin. Nice job Crimson Trace.....another sweet product. (Posted on 11/12/2011)

Write Your Own Review:

You're reviewing: LG-448 Laserguard® for Springfield Armory XD and XD(m)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Fits Springfield Armory XD and XDM Models. Except Tactical (5") and Service (4") XD Gen 1 with single rail notch.
We use cookies to improve your browsing experience. By continuing to browse our website you agree to our use of cookies. To learn more about how we use cookies, please review our privacy policy here.