www.P65Warnings.ca.gov

" />
1-800-442-2406
X

LG-409 Lasergrips® for Kimber Micro 9

SKU# 01-5260

Availability: In stock

Price:   $339.00
SHARE THIS

SHARE

Print:

Availability: In stock

Laser sight for Kimber Micro 9



Quick Overview

Laser sight for Kimber Micro 9
3.5  |  8 reviews
Crimson Trace LG-409 lasergrips for Kimber Micro 9Crimson Trace LG-409 lasergrips for Kimber Micro 9
Move your mouse over image or click to enlarge
Crimson Trace LG-409 lasergrips for Kimber Micro 9 red laser sight for Kimber Micro 9

LG-409 Lasergrips® are the ultimate laser sight for one of the finest concealed carry handguns available - the Kimber Micro 9.  Among our slimmest Lasergrips® ever, the LG-409 features a rubber overmold front activation pad fused with durable polymer grips. User-installed in minutes, Lasergrips enhance the defensive capabilities of the compact Micro line of pistols. This model is specifically designed for Micro 9mm models. Please see model LG-478 for Micro .380 models.

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Product Platform Lasergrips®
Material Polymer
Attachment Grip Replacement
Activation Location Front Activation
Sighting Factory Sighted at 50'
Master On/Off Switch Yes
Free Batteries For Life Yes
Battery Type Two #2032 Batteries
Laser Battery Life Over Four Hours
Laser Output 5mW Red Laser
Activation Mode Pressure Activated
Laser Visibility Approx .5 Inch Diameter at 50 Feet
Wrench Size 0.028
User Adjustable Windage and Elevation
Finish Polymer Grip with Rubber Overmold Activation Pad
Installation User Installed
Warranty Three Year Full Warranty
Color Black
Dot Size Approx. 0.50" at 50'
  1. Practice pistol hold Review by TDAWG
    Rating

    I like to rest my trigger finger above the trigger on the frame. With this hold you'll block the laser. If you've got small hand you'll have to rest your finger on the lower part of the trigger gaurd to keep from blocking the laser. Have had problems activating the laser while on the range.
    Not dependable or maybe just needs new batteries. Just purchased the day before. (Posted on 7/11/2018)


  2. ON/OFF Review by Mark
    Rating

    I purchased my Kimber Micro 9 new with the laser grip installed. Previous reviews are correct, if you draw and shoot right handed, your trigger finger tends to block the beam. In my case, I am a lefty so no issue. But I do shoot with both hands just to keep up off hand skills. My issue is with the on/off switch. Shooting left handed tends to cause the on/off switch to move from off, to on. A really tight grip prevents it, but you have to squeeze the dickens out of it. (Posted on 5/17/2018)


  3. Blocked by finge Review by Jim
    Rating

    Love CT lasers, but agree with the others above. Very frustrated that I have to think about finger placement when I draw to aim. Probably would fail under pressure. (Posted on 4/13/2018)


  4. Blocked by finger Review by Bluerider
    Rating

    When I hold my trigger finger safe, on frame above the trigger guard, my finger blocks the laser. You cannot threaten with a red dot without a finger on the trigger. Also 20 miles of travel, inside padded case, in the saddlebag of my Harley caused laser to lose adjustment. Possibly needs loctite on grip screws, I Hope! (Posted on 4/10/2017)


  5. Laser beam blocked by trigger finger Review by Old Scrounger
    Rating

    I just purchased a Micro 9 with laser grips, but when I activate the laser in my normal right hand hold the laser beam is blocked by my trigger finger, causing me to have to readjust my hold to send the beam down range. The system works just fine in a weak side hold. My son also had the same problem, and neither of us have particularly fat fingers. A laser guard would work much better on this pistol but CT does not offer one. The pistol itself is great (5ASTI Stars), and the mechanical sights are fine, but I am almost 80 years old and I have CT sights on all my other carry pistols, and they all work just fine. (Posted on 3/14/2017)


  6. Seriously accurate laser Review by Richie
    Rating

    I just got a set of the lg 409 for my kimber micro 9.
    They fit perfect and very easy to install and accurate right out of the box. I can't wait to put my kimber through the combat pace at the range.
    So far so good. (Posted on 3/11/2017)


  7. Failure after 60 rounds Review by Mudcat
    Rating

    Bought new micro 9. Shot well and laser was right on ; however after several rounds it completely failed. Checking the on / off switch on the grip still on recovery of laser . Will check batteries but I think the failure is somewhere in the switch either the on/ off switch on the grip OR an issue with the pressure activator switch at front of the grip.
    The micro 9 shoots so well , for my purposes I don't recommend a laser for this pistol . This was a factory installed criminson trace laser grip... Not worth the extra money for this handgun with already excellent sights. (Posted on 2/25/2017)


  8. Left Grip to sharp... Review by Harry
    Rating

    I purchased the Kimber Crimson Carry Micro 9, ordered two different holsters for it, both of "coarse" don't put a layer between me and the grip on the left side of the gun. (Holsters being the Desantis and the Azula OWB holsters) The problem I'm having is the rosewood grip is sharp and extremely pointed at the bottom of the grip. It digs into my side even with a T-shirt on. I called and spoke with Kinessat, she told me it would be alright to sand down the points, however the grip is black material under the rosewood, so it would change colors. Unfortunately, with that said, I don't like this grip. It's on a new $1000 gun which I really don't want warn looking grips. The laser is ok, seems to hold zero so far, but if the gun is uncomfortable to wear because of the sharp grip design, no good to me. (Posted on 2/24/2017)



Write Your Own Review:

You're reviewing: LG-409 Lasergrips® for Kimber Micro 9

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating
Fits Kimber Micro 9