FBFL

" />
1-800-442-2406
X

LG-430 Laserguard® for Kel-Tec P3AT and P32

SKU# 01-2040

Availability: In stock

Price:   $229.00
SHARE THIS

SHARE

Print:

Availability: In stock

Laser Sight for Kel-Tec P3AT and P32 Pistols



Quick Overview

Laser Sight for Kel-Tec P3AT and P32 Pistols
4.29411764706  |  17 reviews
Laser Sight for Kel-Tec P3AT and P32 Laser Sight for Kel-Tec P3AT and P32
Move your mouse over image or click to enlarge
Laser Sight for Kel-Tec P3AT and P32 LG-430 Laserguard | Keltec P3AT and P32

The groundbreaking LG-430 laser sight for Kel-Tec P-3AT and P-32 pistols was the first laser sight application Crimson Trace® developed. This unique design mounts seamlessly onto the trigger guard, placing the laser diode directly under the muzzle. A front-located pressure switch activates the Laserguard® with instinctive activation as the weapon is held in a natural firing grip. Fully adjustable for windage and elevation, the sleek LG-430 is the most fully-featured laser sighting system available for Kel-Tec pistols.

FBFL

Product Type Laserguard®
Material Polymer
Color Black
Activation Location Front Activation
Attachment Trigger Guard
Battery Type One 1/3N Lithium or Two 357 Silver Oxide Batteries
Finish Polymer Housing with Rubber Overmold Activation Pad
Installation User Installed
Laser Battery Life Over Four Hours
Activation Mode Pressure Activated
Sighting Factory Sighted at 50'
User Adjustable Windage and Elevation
Warranty Three Year Full Warranty
Wrench Size 0.05
Dot Size Approx. 0.50" at 50'
  1. Point and shoot-No aim necessary. Review by Tim
    Rating

    The position of the activation button has the LG-430 on and ready for defense as it is leaving the holster or pocket with the simple grip of the hand that it takes to remove my P3AT from my holster or pocket.

    Police training exercises have shown that when trainees are forced to shoot in rush situations, and there isn't enough time to consciously line the front and rear sites up before shooting, the gun is more or less just "pointed" at the target before being discharged. The results of doing that consistently leaves shot placement with their standard size service pistols, lower than their intended target. The shorter the barrel, the worse the accuracy.

    With that being the case, along with the reduced profiles of the front site and groove due to the P3AT's size, seeing the little red dot on the target when the trigger is squeezed, eliminates low shot placement, as well as the need to line the sites up for an accurate shot. With the LG-430, your little pocket rocket can be very accurate and effective from even a compromised shooting position.

    I have had my LG-430 for three years. Only activating the laser to check the battery and several shots periodically at the range to check it for accuracy, (I've never had to adjust it since setting it when it was installed.) I am still using the original battery. However, not wanting the battery to be dead should I need it for defense, with CT offering a free new battery annually, the reason that brought me to this web site is to order two of them. One for my pocket rocket and one for my wife's purse pistol.

    Should time and distance allow it, the little red dot on the chest of the person with the intent of attacking you, may prevent the attack and you from having to justify your defense in court. If not, you're only 1/100th of second away from your second option.

    FIGHT CRIME...SHOOT BACK!!!
    (Posted on 1/26/17)


  2. Poor design Review by TexAble
    Rating

    The grip button is not positioned very well. I agree with another reviewer in that it may be too high. Makes it very difficult to engage the laser. I thought it was just me that would have a problem (large handed male), but when my wife was finally able to get some time at the range we learned it worked very poorly for her as well. Too bad it is now past the return period for us. She was unable to reliably use the laser for its intended purpose. (Posted on 1/2/17)


  3. Very poor design! Avoid if you have medium to large size hands. Review by Maynard
    Rating

    With a man's hands, it is almost impossible to reliably actuate the button on the grip since it is too high up in the trigger guard so it is hard to get the finger over the top of the button where it needs to be to be reliable. I had to replace it with a Armalaser which works just fine for me.

    I like most of the CT lasers, but a very small handed engineer designed this one (or worse, it was never actually tested by an average man) and the result is a sight that is impossible for me to use reliably when firmly (properly) gripping the gun. The button needs to be down about 1/8" on the grip...like it is on all their other sights! (Posted on 11/1/16)


  4. Great Shooting Aid Review by Cherokee
    Rating

    With this laser properly dialed in on your Kel-Tec, you can easily roll soda cans from a distance of 30 to 40 feet away and to make a more impressive display, you will be able to accurately aim right under the can and send it aerial. I love this pistol and laser combination! (Posted on 7/23/15)


  5. Durable Laser Review by Oscar
    Rating

    I have owned a CTC LG-430 that I have mounted on my Kel Tec P3AT for several years now and it has never failed me. It still works great and I have never had to replace the batteries yet. It is very durable and rugged. I highly recommend this laser to anyone that owns the P3AT. (Posted on 3/2/15)


  6. Great product, even greater service! Review by Mike
    Rating

    Just received replacement for my LG430, which failed after 2 yrs 10 mos. No questions, no hassle, no problems, just returned the old one and they sent me a new unit! What great service! The sight is amazing in its own right, clear, bright, super easy to activate. It's mounted on my wife's P32 and she loves it, takes away her concern over proper sight picture. (yes she can use the iron sights but the laser is so much easier) I would recommend this sight and CTC to anyone. (Posted on 2/24/15)


  7. Outstanding product Review by Chuck
    Rating

    The Kel-Tec p-3AT is definitely what I want in a pocket pistol. Light, tiny, and invisible with a decent pocket holster - a must have for pocket carry. The only drawback is the sights, necessarily small for concealment, but almost useless for eyes that that are into their 8th decade. When I saw that CT was making a laser for it, I was interested, but thought the method of installation somewhat suspect. I have seen that type of mount on other brands, did not like it. I should have known better, the crimson trace system is flawless. I was even able to use my same pocket holster. The laser comes on naturally when you grip the pistol, and can be sighted in for whatever ammo you choose. The .380 is a fairly light round, but will do the job with accurate placement - which you get with the CT laser, and quickly. In reference to the guy who had trouble with the lack of space in the trigger guard, my digits are on the large side, and I have no problems at all. Wouldn't work with gloves, but if it is winter, I will probably be wearing something better suited to carrying a larger weapon. It is also possible to re-position your trigger finger for a better fit. Would not carry a defensive pistol with out CT. (Posted on 9/27/14)


  8. Must have laser!! Review by Alan
    Rating

    I bought a P3AT for deep cover. I have large hands and shooting this pistol accurately without a laser is difficult. I put the LG-430 on mine a couple of years ago and WOW!!!...what a difference it made!! This laser is a must have for accurately shooting this pistol if you have large hands. Thank you Crimson Trace! (Posted on 6/28/13)


  9. Perfectly fit, perfectly designed Review by Bryan
    Rating

    If there is a way to make this work with the P3AT any better, I don't know what it is. Gun is drawn and presented and there's the dot. No muss, no fuss. (Posted on 2/6/13)


  10. Great Laser Review by Patrick
    Rating

    This is a very stable laser and it comes on when I need it. Keeps zero perfectly!!! (Posted on 1/17/13)


  11. Poor Planning Review by SGACOWBOY
    Rating

    Product takes up too much of the room between the trigger and trigger guard. If you have medium or larger fingers it is hard to advance your finger forward far enough forward for the trigger to engage for the next shot. Results: you often pull the trigger and the gun doesn't fire. Removed mine and sold it on internet. (Posted on 1/13/13)


  12. Love it Review by Dennis
    Rating

    I have had this laserguard for quite a while now and have had no problems with it, it keeps the profile of the gun small for pocket carry and it just works. I can't see myself without this product on this gun. (Posted on 12/29/12)


  13. Great Laser. Review by Joe
    Rating

    I just received this laser yesterday. It assembled in five minutes. It had to be adjusted but is easy to adjust. It is a fantastic addition to a Keltec P3AT. To top it all off this laser is made in America! Now how do you beat that. (Posted on 10/13/12)


  14. Better than the sights! Review by Miles
    Rating

    I have a bunch of great things to say about the KelTec P3AT and only two complaints: The size of the grip and the sights. Of course, the reason for having a pocket pistol is small, so the grips have to be minimal! And the sight profile has to be small as well!

    The grips: all a shooter can do is wrap as much of your hand around it as possible and hold on tight - this little thing bucks!

    The sights: get a CrimsonTrace LG-430 and forget about them! Just grip the little gun tightly, put the laser dot on where you want the hole and press the trigger - Voila! There's a hole!

    Love it! (Posted on 9/7/12)


  15. The Best Accessory For Personal Protection Review by JD The Gas Man
    Rating

    Just attached new laser to Kel Tec and now want more for the Glocks......excellent product. (Posted on 1/16/12)


  16. Chrismon Trace is a must....if you believe in self protection!!! Review by Sheik
    Rating

    I believe in Crimson Trace so much, I have the Laser's on three of my carry handguns! (Posted on 12/15/11)


  17. Fantastic! Review by Sandy
    Rating

    Recently had the opportunity to see the LG-430 first-hand on the P3AT of a friend. This is awesome! Really makes a difference on this feisty pistol. Definitely on my wishlist. (Posted on 12/11/11)



Write Your Own Review

You're reviewing: LG-430 Laserguard® for Kel-Tec P3AT and P32

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating
Fits Kel-Tec P3AT and P32 Generations I & II.
S1p7-eSHwMw|